Setting up the wifi system configuration

Buzz

Ngày cập nhật gần nhất: 15/4/2026

Content

Logging into the wifi system

Discover how to configure your wifi system to address issues such as changing wifi passwords or names. Refer to this article for effective wifi configuration.

In this article, Mytour introduces you to the process of setting up the wifi system configuration. After reviewing, you'll be able to interact with your wifi modem without the need for technical assistance.

Logging into the wifi system

Step 1: Find the IP address

Locate the computer using the Modem's LAN network. Type CMD or press Windows-R, then enter 'cmd'.

Execute the command Tracert 8.8.8.8. Wait a moment for the first IP to appear; that's the modem's IP.

Step 2: Open your browser, access 192.168.1.1 or 192.168.0.1, then enter the following information:

Username: admin (root)
Password: admin (or 12345)

Change Access IP to the modem

To modify the access IP to the modem, go to the LAN tab, enter your desired IP in the IP Address field. Choose an IP range that is easy to remember; your wifi will restart after the change for reconnection.

Change wifi password

To change your wifi password, access the Wireless > Security tab (varies by device). Then, in the WPA/WAPI passphrase field, enter your new password.

So, Mytour has just introduced you to the process of configuring your wifi system. We don't provide complex settings or configurations as they may cause issues or errors in your wifi system. Additionally, we also guide you on Creating a Wifi Hotspot on a Computer using UC Browser. If interested, feel free to check it out for reference.

Frequently Asked Questions

How can I change my wifi password in a few simple steps?

To change your wifi password, access the Wireless > Security tab on your modem's settings. Enter your new password in the WPA/WAPI passphrase field, and ensure it meets security requirements for better protection.

What is the process for finding my modem's IP address on a computer?

To find your modem's IP address, open Command Prompt by typing 'cmd' in the Run dialog. Execute the command 'Tracert 8.8.8.8' and wait for the first IP address to appear; this is your modem's IP.

Is it necessary to restart the wifi after changing its access IP?

Yes, after changing the access IP for your modem, a restart is required. This allows your wifi network to reconfigure and reconnect with the new settings.

What should I do if I encounter issues during wifi configuration?

If you encounter issues during wifi configuration, double-check the steps you've followed. Ensure you are entering correct credentials and settings; if problems persist, consulting the modem's manual or seeking technical support may be necessary.

Mytour's content is for customer care and travel encouragement only, and we are not responsible.

For errors or inappropriate content, please contact us at: [email protected]