Setting Up Your Smart Board Like a Pro

Ensure your smart board setup is flawless with these essential tips. First, confirm your data projector is in working order. Note: This guide does not cover software instructions.

Secure the wheels firmly in place to prevent any movement of the smart board within your classroom.

Stabilize the smart board by lowering the leg braces, ensuring it remains stationary even during student interaction.

Connect your projector and laptop using the VGA cable labeled Computer #1 input. Ensure a secure connection by tightening the screws. Note: The smart board doesn't require an AC adapter, but ensure your laptop is plugged into a power source.

Activate the projector screen by pressing the power button until you hear a sound indicator.

Plug the USB cable's flat side into your laptop, and connect the square end to the corresponding port on the bottom right of the smartboard.

Simultaneously press the 'Fn' key and either the 'F7' or 'F4' key on your laptop's keyboard to activate the Function mode.

Select 'Presentation on projector and notebook' from the options displayed when a black box appears.

Remain calm if the projector and laptop screens briefly flash black. This indicates the system is adjusting display settings for the projector screen.

Ensure the computer projection fills the entire smart board by adjusting the zoom and focus settings accordingly.

Calibrate the smart board by pressing the two buttons located on its tray.

Utilize your fingers or one of the provided special pens to touch the calibration targets on the board.

Make sure you have the following items ready: - Data Projector - Smart board - Special pens