Buzz
During cooking, food and ingredients in the pot may spill onto the induction cooktop when it is cooking at high temperatures. This not only causes hygiene issues but also has the potential to lead to cooktop fires if not dealt with promptly.
Furthermore, when frying or sautéing dishes, oil often splatters and easily comes into contact with the induction cooktop. Without regular cleaning, oil stains can create discoloration, burns, and hard buildup on the cooktop surface, reducing the efficiency of the stove and causing cooktop fires.
Reasons Why Induction Cooktops Catch Fire
One of the common reasons the glass surface of an induction cooktop gets scratched, cracked, and renders the stove unable to operate effectively is due to dragging heavy objects, strong collisions, and impacts on the cooktop surface. This can damage the heat-resistant glass surface, resulting in uneven heat distribution and increasing the risk of cooktop fires.
Step 1: Sprinkle 2 - 3 tablespoons of baking soda onto the burnt areas of your stove top, then spray a little vinegar on top.
Step 2: Leave the mixture on the stove top for about 30 - 60 seconds, allowing it to react and bubble, effectively dissolving burnt residues or grease buildup.
Step 3: Wait until most of the bubbles dissolve, prepare a soft cloth and use it to wipe clean the burnt and greasy areas on the stove.
Utilize Baking Soda and Vinegar
Step 4: If the stains persist after wiping, repeat the above steps. Allow the solution to sit for about 10 minutes, then proceed to wipe clean.
Step 5: Once the dirt is wiped away, use another clean soft cloth to wipe the stove top. Spray glass cleaner or clean water onto the stove, then use a paper towel to dry and polish the stove top for added shine.
Step 1: Tilt the specialized stove scraper at a 40-degree angle, then gently scrape off the burnt layers on the stove top. Avoid excessive force on the stove top, as it may cause the glass surface to crack or scratch.
Step 2: Afterwards, use a soft cloth to wipe the stove surface clean.
Utilize Specialized Scraper
Step 1: Mix lemon juice with clean water to create a diluted solution in a 1:1 ratio.
Step 2: Dip a damp cloth into the prepared solution, then wipe the entire stove top, especially focusing on heavily burnt areas.
Utilize Lemon Juice Solution
Step 3: Finally, use clean water to wipe the stove top with a soft cloth until it appears free of burns and shines.
Clean with Dish Soap
This method is effective for regular grease stains and does not work well on highly adhesive residues, so you may want to consider before using this method following the steps below:
Step 1: Apply dish soap directly onto the induction cooktop surface.
Step 2: Use a cloth or a sponge to wipe clean.
Step 3: After wiping, use a soft cloth and clean water to wipe again.
Cleaning with Dish Soap
Cleaning with Cif and Cloth
Step 1: Prepare a bottle of specialized Cif kitchen cleaner and a clean dry cloth.
Step 2: Spray Cif directly onto the stove top and burnt spots, allowing the solution to soften tough residues and loosen them from the surface.
Step 3: After spraying, gently wipe the entire stove top with a soft dry cloth. Your cleaning process is now complete.
To ensure safety and efficiency while using an induction cooktop, you should pay attention to the following:
● Only use pots with magnetic bottoms such as cast iron or stainless steel 403 for cooking. Induction cooktops can only be used with cookware made from these materials.
● Avoid water spillage while using the cooktop, as the glass surface may crack due to sudden thermal shock.
● Before cleaning the induction cooktop, make sure to turn off the power and wait until the cooktop cools down completely before proceeding with the cleaning process. This helps prevent electrical sparks and ensures safety for you.
Essential Tips for Using an Induction Cooktop
● Clean the cooktop regularly, especially after cooking, to remove grease and any debris spilled on the surface.
● When using objects on the cooktop, minimize dragging and strong impacts to avoid scratching or breaking the heat-resistant glass surface.
● Perform regular inspections and maintenance of the induction cooktop to ensure stable and safe operation.
Above are the guidelines for cleaning the induction cooktop surface, which you can refer to. Hopefully, this information will help you choose the right method and ensure safety when cleaning the cooktop surface.
