Speaker Surrounds: A Comprehensive Replacement Guide

Speaker surrounds, located near the speaker cone, degrade over time, affecting performance. Replace them to improve device functionality. Learn how with Chợ Lớn Electronics & Furniture.

Step-by-Step Speaker Surround Replacement

The surround of a speaker, often a closed loop at the edge of the speaker cone, plays a crucial role in connecting the cone to the speaker frame. It's typically made from elastic materials to move with the speaker's vibrations.

The primary function of the speaker surround is to modulate the bass response's flexibility or rigidity, directly influencing the sound quality emitted by the device.

The speaker surround is a circular band crafted from elastic materials

Speaker surrounds are categorized based on their manufacturing materials. Currently, the market features several popular types:

Rubber, widely used for its flexibility, durability, and excellent elasticity, is also a choice material for speaker surrounds. Rubber surrounds provide a soft, deep sound quality, are cost-effective, and easy to replace.

Fabric speaker surrounds, known for their durability and capability to handle large vibration amplitudes, are often used in high-performance speakers with wide frequency ranges and high power output, including those for stage and auditorium use.

Jamo C93 II Speakers

Foam surrounds are typically found in speakers with moderate power levels, especially in home karaoke systems. They excel at reproducing rich, appealing bass sounds but tend to degrade over extended periods of use.

Many users hesitate to replace their speaker surrounds, fearing it might degrade sound quality. In reality, if you opt for a high-quality replacement, your speaker can perform as well as or even better than before.

Before proceeding with a surround replacement, remember these tips for a smooth and efficient process:

● Choose authentic, high-quality speaker surrounds for better sound reproduction.

● Use specialized adhesive for speaker surround replacement. Seek advice from the seller for the best type.

● Apply just enough glue; avoid using too much.

● Accurately locate the screw positions to prevent alignment issues in subsequent steps.

● Disconnect the speaker from power before starting the surround replacement.

JBL MK10 Speaker Set

Below are the detailed steps for replacing speaker surrounds:

● Step 1: Apply lighter fluid at the junction between the speaker surround and cone, cover it tightly with a bag or similar item, and wait for about 10 minutes. Then, remove the old surround and clean the area thoroughly.

● Step 2: Test fit the new surround to mark the screw positions. Drill holes and secure screws at these marked spots.

● Step 3: Apply adhesive to the speaker cone's edge where the new surround will attach, spreading it to about 5mm wide. Be meticulous to prevent excess glue, which could affect sound quality.

● Step 4: Affix the new surround in place. Wipe away any excess adhesive with a cloth or paper towel. Press firmly on the surround to ensure strong adhesion.

● Step 5: Apply an additional layer of adhesive to the outer rim of the speaker for enhanced stability of the surround.

Klipsch RB-81II Cherry Speaker Set

Overall, replacing a speaker surround is quite straightforward and manageable, requiring precision, dexterity, and caution. We hope the insights provided by Điện Máy - Nội Thất Chợ Lớn enrich your understanding and assistance in upgrading and maintaining your audio equipment.