Buzz
In this article, Mytour shares the standard dimensions of motorcycle and car parking lots to help you easily design standard parking lot dimensions for motorcycles and cars. We invite readers to refer to it.
Standard Dimensions of Parking Lots
1. Parking Lot Design Standards
According to regulations, the design standards for parking lots are as follows:
- Parking Lot Area: Designed scientifically and appropriately to meet parking needs, ensuring the safety and convenience of vehicles.
- In residential and housing areas, land should be allocated and designed for parking.
- Standard Dimensions of Parking Lot for One Space:
+ Area for parking a bicycle is 0.9m2.
+ Area for parking a motorcycle, moto is 3m2.
+ Area for parking a boat is 8m2.
+ Area for parking a compact car is 25m2.
+ Area for parking a truck is 30m2.
+ Area for parking a bus is 40m2.
- In urban redevelopment, parking spaces for compact cars can be arranged on the streets with a width larger than the necessary requirements.
2. Standard Parking Lot Dimensions for Cars
a. Common Dimensions of Car Parking Lots
- Standard Width of Common Car Parking Spaces (M):
+ Standard type is 2.4 - 2.75m
+ Type for disabled individuals is 3 - 3.5m
+ Long-term type is 2.5 - 2.75m
+ Short-term type is 2.3 - 2.6m
- Standard Length of Common Car Parking Spaces (L) ranges from 4.75 - 5.5m
- Width for Car Pathway (N) varies:
+ Dimensions of two-way car traffic are 6.95 - 10.7m
+ Dimensions of one-way car traffic are 6m - 9.15m
- Standard width of parking lots (P) varies from 15.5 - 20.1m
b. Standard Dimensions of Parallel Parking
Parallel parking indoors:
- Distance A approximately 5.8m
- Length of a car parking space is about 4.6m
- Width of a car parking space ranges from 2.2 - 2.3m.
Parallel parking outdoors:
- Distance A is 6.1 - 6.7m,
- Length of a car parking space is 5.5m
- Width of a car parking space is 2.4m
c. Standard Dimensions of Parking at 45-Degree Angle
Indoor Diagonal Parking Lot:
- Distance A is 3m
- Distance B is 4.6m
- Distance C is 2.3m
- Distance D is 3.26m
- Distance E is 5m
- Distance F is 2.8m
Outdoor Diagonal Parking Lot:
- Distance A is 3.39m
- Distance B is 5.5m
- Distance C is 2.4m
- Distance D is 3.89m
- Distance E is 5.5m
- Distance F is 2.8m - 3m
d. Standard dimensions of parking lots arranged with perpendicular and 45-degree diagonal arrangements
* Standard dimensions of parking lots with wide parking spaces and narrow pathways
- The length measures 5.5m
- The width measures 3m
- The pathway between two standard spaces is 4m
* Most common parking lot dimensions
Parking lots arranged for cars at a 90-degree angle have the following dimensions:
- Each space has a length of 5.5m.
- The width of each space ranges from 2.3 to 4m.
- The width of the entrance and exit pathway meets the standard at 6m.
* Standard dimensions of parking lots with back-to-back arrangement at a 45-degree angle
- The length of the right angle side of the parking space measures 8.5m
- The width of the parking space ranges from 2.3 to 4m.
- The width of the pathway between two spaces is 4m.
* Standard dimensions of parking lots arranged at a 45-degree angle
- The width of each space ranges from 2.3 to 4m.
- Each space has a length of 6m.
- The width of the pathway between two parking spaces is approximately 2.5m.
3. Standard dimensions of parking lots for coaches
The common lengths of buses are 7.2, 10, 12m. Therefore, the standard dimensions for bus parking lots will be as follows:
* Standard dimensions of bus parking lots
- Each parking space has a length of 12m.
- The width of each bus parking space is 3.5m.
- The minimum distance from the bus nose to the fence is 14m.
* Standard dimensions of bus parking lots arranged at a 45-degree angle
- Each space has a length of 11m.
- The width of each bus parking space is 3.5m.
- The minimum distance from the front of the bus to the fence is 8m.
* Standard dimensions of bus parking spaces on the street
- The width of the inlet is 2.6m.
- The length of the diagonal side of the slanted road is approximately 16.2m.
- The side parallel to the road edge is at least 1m.
- The length of the side parallel to the road edge is 12m.
Here, we have updated the standard dimensions of parking lots for motorcycles and cars to help you quickly design parking lots that meet regulations.
Effective parking management software will assist you in better managing parking lots, making it easier. Some parking management software you should consider using include S Parking, Vparking, Car Parking ...
