Buzz
Explore the Standard Window Sizes in Vietnam for Designing Your Home
Use Ban Hole Calipers to Measure Window Sizes
Chọn thước lỗ ban để đo kích thước cửa sổ
Ban Hole Calipers: Practical Measurements for Functional Spaces
Choose the Correct Ban Hole Caliper: 52.2 cm for Accurate Measurements
Window Sizes According to Harmonious Ban Hole Measurements
For rooms smaller than 15m2, opt for 2-panel windows. Larger rooms can accommodate 3-panel or 4-panel windows. Each panel count has its own terminology:
- 2-panel windows are called Harmony Prosperity Longevity.
- 3-panel windows are called Triple Blessings Opening Auspiciousness.
- 4-panel windows are called Four Auspiciousness.
Single-panel windows are seldom used due to the belief that they bring in negative energy. They are typically placed in basements, north-facing walls, or dimly lit areas.
Window Sizes According to Ban Hole Calipers
- Window height: 0.59 – 0.62 – 0.69 – 0.88 – 0.89 – 1.25 – 1.33 – 1.44 (m).
- Window width: 0.47 – 0.61 – 0.66 – 0.85 - 0.89 – 1.08 – 1.25 – 1.26 (m).
Standard window height and width should be within the effective depth range of the room. The bottom edge of the window should be at least 83 cm above the floor and not exceed 2.2m in height.
For 2-panel windows, you can choose from the following sizes:
- Window height: 1.28 – 1.33 – 1.34 - 1.44 – 1.53 (m).
- Window width: 0.88 – 0.89 – 1.05 – 1.06 – 1.08 – 1.09 (m).
Dimensions for 2-Panel Windows
There are no standard sizes for windows. Standard window sizes are determined based on proportional ratios to the specific area of each room and in relation to the size of the main door. According to Vietnamese standard TCVN 7451:2004 for windows, there are some common window sizes (mm):
- 2-panel windows with inward opening:
- 2-panel windows with outward opening:
- 2-panel windows with tilt-and-turn opening:
Other Sizes of 4-Panel Windows
This article has provided standard and common dimensions of 2-panel and 4-panel windows, as well as window dimensions according to the hole size. You can refer to these dimensions and then consult with production technicians for further advice. We wish you will choose the right type of window with suitable window dimensions.
