Buzz
The most common diagnosis for the E10 error on Electrolux washers is inadequate water supply. If insufficient water is supplied for a program or cycle, the Electrolux washer will display error code E10 and will not function.
What causes the E10 error on Electrolux washers? Is it due to poor usage habits or manufacturing defects? Can the E10 error on Electrolux washers be fixed? All these questions will be answered in the following article.
Operating principle of Electrolux brand washers
- Command 1: Pressing the Start button initiates the machine, locking the door with control circuits.
- Command 2: Subsequently, after the door is locked, it cannot be opened. At this point, the drain pump activates to remove any remaining water in the drum.
- Command 3: The machine will supply water and rotate to operate the wash cycle. It will perform 3 – 4 water fill, agitation, and spin cycles, followed by a final spin cycle. Then, it releases the door switch and ends the wash command. The Electrolux washer will display the E10 error at the third command, related to the water supply line into the machine.
Common causes of Electrolux washer error E10
- Weak water supply line, excessively long wait time for re-supply.
- Clogged water supply hoses or valves causing slow water supply to the machine.
- Clogged detergent dispenser due to excessive detergent residue.
- Malfunctioning water inlet valve in the washer, leading to frequent failures and coil damage.
- Control IC malfunctioning in water supply, naturally displaying error code E10 on the screen.
How to detect E10 error in Electrolux washer as soon as possible?
Quite straightforward for modern washers equipped with LCD screens. When there's a water inlet issue, the E10 error code will be displayed. What about Electrolux washers without LCD screens? Blinking frequency and color of the Start/Pause light can be used to identify E10 error in Electrolux washers. Technicians often perform this task. The issue arises when you can't do it this way because the Electrolux washer loses power.
How to fix Electrolux washer E10 error definitively?
- Improve the water source of the machine by installing an additional booster pump to increase water pressure.
Above are the reasons behind the E10 error in Electrolux washing machines, hope this article will be helpful for you in using the washing machine.
