Top 14 Steps to Create Clay Flowers Resembling Real Ones

Ingredients:- Clay from Thailand, South Korea, or Japan. Japanese clay yields the most beautiful results.- Oil paints: Winton oil or pebeo colors can be used...- Zinc rods- Foam cores for flower centers or carve your own foam pieces into flower shapes- Glue, 502 glueTools:- Molds, veins, rolling bag, rolling machine, rolling stick (optional)(for reference, visit the Facebook page specializing in clay flowers at https://www.facebook.com/hoadatsonganh/)

Use a rolling machine to flatten the clay (if hesitant to invest in a rolling machine and molds, shape the clay into a water drop shape, then place it in a rolling bag, and use a smooth wooden stick or stainless steel rod to roll the clay thin) -> use clay cutters to cut the clay -> remove excess clay from the rolling bag -> fold the rolling bag again -> use your index finger to shape the petal edges.

Mix clay with colors

Use a foam piece in the desired shape (can be purchased or carved) -> use zinc rods (steel rods) with a moderate thickness of about 1-1.5mm, wrap wax paper around, dip one end of the zinc rod in glue -> insert deep into the foam core -> apply glue around the foam core to attach the flower petal.

Step 5: Begin sticking the flower petals onto the foam covered with glue. The outer petals should be higher than the inner ones, sticking the back side inside and the front side outside. Stick about 4-6 petals in sequence to cover the foam completely.

One by one, take each petal and adhere it onto the foam covered with glue. The outer petals should be positioned higher than the inner ones, placing the wrong side inside and the right side outside. Stick approximately 4-6 petals to cover the foam.

Crafting floral pedestals: Similarly to crafting flower petals, utilize a mold to shape the pedestal. If you lack a mold, sculpting the green terrain into a water drop shape akin to crafting flower petals without a mold is feasible, albeit resulting in a slender and elongated form. Though somewhat laborious, for the sake of charm, employ scissors to cut the pedestal in a manner resembling the provided image. Employ a stick to gently curve each pedal for an elegant curvature.

Forming floral pedestals: Analogous to crafting flower petals, employ a mold to shape the pedestal. In the absence of a mold, shape a patch of green earth into a teardrop silhouette akin to creating flower petals without a mold, albeit this shape will be lean and elongated. Despite being somewhat arduous, for the sake of allure, utilize scissors to sculpt the pedestal as depicted, using a stick to mold each petal for a graceful curve.

Step 9: Attach the receptacle to the flower. Apply glue in the center of the receptacle and affix it to the base of the flower as shown.

Attach the receptacle to the flower. Apply milk glue in the middle of the receptacle and then stick it to the flower base as illustrated.

Step 12: Assemble the flower leaves. After the flower stem is about 70% dry, use 502 glue to assemble the leaves. Depending on individual aesthetic preferences, arrange the leaves on the branch. For a more natural look, you can take some soil with half a bean, shape it into a droplet, then use milk glue to attach it to the flower branch to create thorns for the flower. A beautiful rose must have thorns!

Assemble the flower leaves. Once the flower stem is approximately 70% dry, use 502 glue to assemble the leaves. Depending on personal aesthetics, arrange the leaves on the branch. For added naturalness, you can take some soil with half a bean, shape it into a droplet, then use milk glue to attach it to the flower branch to create thorns for the flower. Remember, a beautiful rose must have thorns!

Step 11: Setting the flower stem. Apply milk glue underneath the flower and zinc - wrap it around the zinc like H2 - gradually pull down (H3) the soil, depending on the flower arrangement needs, decide the length of the flower branch - slope the flower branch down, use both hands to smooth the flower branch.

Setting the flower stem. Apply milk glue underneath the flower and zinc - wrap it around the zinc like H2 - gradually pull down (H3) the soil, depending on the flower arrangement needs, decide the length of the flower branch - slope the flower branch down, use both hands to smooth the flower branch.

Completion of the Product

And there we have it, a beautiful rose flower to adorn our homes...