Buzz
Encountering E2 error on an infrared stove is a common issue. But why does an infrared stove display E2 error? How to fix this problem? Follow this Mytour guide!
1. What Causes E2 Error on Infrared Stove?
E2 error on an infrared stove is a frequently encountered issue. When this occurs, the stove's display will flash E2 and then turn off, rendering the stove unable to operate properly. According to the manufacturer, E2 error is related to the temperature sensor.
The reasons why an infrared stove shows E2 error may include:
- - Your home's power supply exhibits signs of instability or fluctuations.
- The cookware used is unsuitable, often due to the pot's diameter being too small or too large for the cooking zone on the stove.
- Additionally, circuitry malfunctions, burnt ICs, or insufficient cooling fans can cause the stove to overheat.
How to Fix E2 Error on Infrared Stove
If your infrared stove is unfortunately showing E2 error, don't panic. Here are the steps to troubleshoot:
- - Step 1: Firstly, turn off the stove using the ON/OFF button but leave it plugged in to allow the cooling fan to run. Then, wait for the stove to cool down before starting the inspection. If you notice the cooling fan running weakly or not running at all, consider replacing it.
- - Step 2: After 15 minutes, attempt to turn the stove back on for inspection. If the E2 error persists, check the power plug for looseness. Additionally, inspect your home's power supply for any signs of instability. If instability is detected, consider using a stabilizer to ensure the smooth operation of the power supply.
- - Step 3: In case the E2 error still persists after the above steps, continue to inspect your cookware. If the diameter of the pots or pans is too large or too small for the cooking zone, replace them with suitable ones.
- - Step 4: If you've gone through all the steps above and the E2 error still appears on the infrared stove, it may be due to faulty IC or circuitry issues. This is a rather complex problem, and it's best not to attempt DIY repairs. It's recommended to contact the warranty center or professional technicians for assistance!
Important Notes During Troubleshooting
When troubleshooting the E2 error on your infrared stove, here are some key points to keep in mind:
- - Avoid attempting to repair the issue yourself if you lack understanding of the structure and experience in repairing infrared stoves.
- If your infrared stove is still under warranty, contact the authorized service center for assistance in troubleshooting.
