Buzz
The OE error is common on LG washers. Wondering what causes it and how to fix your LG washer when it won't spin? Find solutions below.
What Does LG Washer Error OE Mean?
LG washer error OE indicates the machine is unable to drain water from the drum. This can stem from clogged, bent, or twisted drain hoses. Alternatively, the drain pump filter might be dirty, obstructed, or malfunctioning.
Additionally, LG washer OE error can result from a faulty circuit board that fails to supply power for the draining process.
Causes of LG Washer Error OE: Spin Issue
LG washer error OE may result from:
- Clogged drain hose preventing water drainage.
- Dirty or obstructed drain pump.
- Malfunctioning drain valve or pump due to foreign objects.
- Faulty circuit board causing insufficient power supply.
How to Fix LG Washer Error OE: Spin Issue
To resolve LG washer error OE, identify the cause and try these solutions:
Check the washer's drain hose.
First, ensure the drain hose of your LG washer is not twisted or kinked. This ensures water can easily drain from the drum.
If the drain hose is twisted or kinked, remove and adjust it. If the hose is damaged, replace it.
If the drain hose is not twisted or kinked, check for dirt or foreign objects inside. Clean the hose and remove any obstructions if found.
Inspect the filter of the washer's drain pump
Another step to troubleshoot LG washer error OE is to check the filter of the drain pump. Unplug the LG washer and rotate the drain pump filter handle to the left to remove it.
Use a small brush to clean the filter thoroughly. Finally, rotate the filter handle to the right to reinstall it with the washer.
Check the Drain Pump Condition of LG Washer
To check the drain pump condition on your LG washer, you can do so using one of two methods:
Method 1: Connect the washer to power and check if the pump and drain valve are functioning properly. If they are, you're good to go. If the drain pump is inactive, it indicates issues with the drain valve or pump, potentially damaged coils.
Method 2: Use a multimeter to measure the resistance of the washer. If the multimeter shows resistance, the coils are in good condition. Conversely, no resistance indicates issues with the drain valve or pump, requiring replacement.
Check the Control Circuit Board when LG Washer Error OE Occurs
Finally, if the above methods have been attempted but the OE error persists, check the control circuit board of the LG washer. If there's no power supply to the drain valve, you'll need to repair or replace the circuit board.
Above is a guide on how to handle and resolve LG washer error OE effectively, allowing the machine to function normally again.
