Troubleshooting the Top 5 Common Electrolux Washing Machine Error Codes and Fixes

Washing machines have become an essential appliance in every Vietnamese household, especially those from the Electrolux brand. However, during usage, you may come across error messages. Here are the top 5 common Electrolux washing machine error codes and how to address them.

1. Electrolux Washing Machine Error Code – Water Supply Issue

If you see error codes like E12, E13, EC1, or EF4 displayed on your machine, it indicates a water supply problem.

• Error Code E12

E12 indicates a signal of low water supply (drying cycle). Simply open the water valve if it's closed or if the water pressure is low. Ensure the drain hose is correctly positioned, check the water supply valve, or replace the PCB Board if needed.

In this situation, opening the water valve or adjusting the drain hose to the correct position can resolve the E12 error. Additionally, inspect the water supply valve and replace the PCB Board if necessary.

• Error Code E13

Error Code E13 indicates water leakage. To fix this issue, ensure the drain hose is correctly positioned, open the water valve, or inspect and replace the water supply valve if it's faulty.

Error Code EC1 doesn't exist in the provided content. Please check the error code and provide accurate information for resolution.

Error Code EC1 indicates a water supply valve blockage while the flow meter is active.

To resolve this, check the wiring, water supply valve, or circuit board. One of these components may be faulty.

• Error Code EF4

Error Code EF4 signals low water pressure, no signal from the flow meter, and the water supply valve is open. In this case, simply unlock the blocked water valve, and the machine will function normally.

2. Electrolux Washing Machine Error Codes – Issues related to the float switch

• • Error Code E35

Error Code E35 indicates water overflow.

To resolve this, check the water supply valve, hose leading to the pressure switch for any leaks, the float switch, wiring, and circuit board for damage. Replace or repair any faulty components to restore normal machine operation.

• Error Code E38

Error Code E38 points to a clogged pressure chamber (water level does not change within 30 seconds of drum rotation). Check immediately for a broken belt or a blocked hose leading to the pressure switch. Repair or replace as needed for the machine to function properly.

Check if the belt is broken or the hose leading to the pressure switch is blocked. If so, repair or replace, and the machine will operate normally.

• Error Code E3A

Error Code E3A indicates a fault in the water heating relay and resistor circuit. In this case, the circuit board is damaged, and you need to replace it.

3. Electrolux Washing Machine Error Codes – Knob-related issues

• • Error Code E82

Error Code E82 for Electrolux washing machines signifies a rotation position error. In this situation, your circuit board may be faulty, and you should replace it with a new one.

If the circuit board is damaged, consider replacing it with a new one to resolve this issue.

• Error Code E83

Error Code E83 indicates a knob rotation position reading error.

If you encounter this E83 washing machine error, replace the circuit board to resolve the E83 issue.

4. Electrolux Washing Machine Error Codes – Display Board Issues

• • Error Codes E9H, E9C, E9D

When facing E9H (communication error between processor and board memory), E9C (machine configuration error), E9D (incorrect clock pulse), check the display board. It's likely damaged, and for resolution, consider replacing or repairing it.

• Error Code E9F

Electrolux Error Code E9F indicates a communication error between the PCB and peripheral devices. To resolve, check the wiring between the PCB and Inverter and repair any issues found.

5. Electrolux Washing Machine Error Codes – Protection Circuit Issues

• • Error Code EHE

Error Code EHE signifies an incompatibility between the protection relay and the protection circuit. If your washing machine displays EHE, check the connection cables and the circuit board; they may be damaged.

In the scenario of EHE error, inspect the connection cables and circuit board, as they might be damaged.

• Error Code EHF

Error Code EHF indicates a protection circuit error (incorrect input voltage to the processor).

If your washing machine shows the EHF error, check the circuit board; it might be damaged.