Buzz
The use of wifi nowadays is an essential need not only in offices but also in every household. However, on some Tenda wifi devices, many users do not know how to troubleshoot or fix the issue of being unable to change the Tenda wifi password. In the previous article, Mytour has shared with you how to change the Tenda wifi password in quite detail. However, there are many subjective and objective reasons, and in this following article, Mytour will provide some reasons as well as solutions to fix this issue to help readers change the Tenda Wifi password quickly.
Unable to Change Tenda Wifi Password: Causes and Solutions
1. Login IP address is not 192.168.1.1
The habit and concept of using default gateway addresses 192.168.1.1 or 192.168.0.1 have deeply ingrained in the minds of many when they want to log in to the Tenda Wifi to change the SSID and password. However, in reality, the login IP address of Tenda Wifi may have been changed and is no longer the default range of 192.168.1.1 or 192.168.0.1.
In the case where the default IP range has been changed, you first need to Reset the Tenda Wifi to restore the device to its original state, which means the default IP address will be 192.168.1.1 or 192.168.0.1. To reset the Tenda Wifi, you just need to use a ballpoint pen and press the reset button on the back of the wifi for about 20 seconds until all the lights on the device flash, then release the reset button.
After successfully resetting, you can proceed to change the Tenda Wifi password as usual.
2. Incorrect login information
Most Tenda devices have default login credentials as admin/admin. However, some devices provided by ISPs may have different login credentials. To know the details of the IP as well as the login username and password provided by the ISP, please refer to the article on account, login password for wifi modem here to be able to change the Tenda Wifi password.
3. Incorrect connection method.
Many users accessing wifi routers in general and Tenda Wifi in particular may encounter issues with accessing or encountering a strange interface not related to Tenda Wifi. The reason could be that you haven't disconnected directly from the modem or the network cable connected to your computer is plugged into the Wan port.
To address this issue, readers simply need to ensure that all network cables connected to the Tenda Wifi are unplugged and only connect the network cable directly from the device to the computer via the LAN port (yellow) and then begin the process of changing the Tenda wifi password.
Here are the causes and solutions for the issue of unable to change TP Link wifi password that Mytour wants to share with readers. In case you cannot access 192.168.1.1 or 192.168.0.1, the simplest solution is to hard reset the Tenda Wifi to set up, reinstall the system from scratch. If you are not familiar with the reset process, you can seek assistance from the ISPs you have subscribed to. Of course, resetting the device means you have to set up WiFi again, as well as other related parameters, especially devices integrated with wifi modems. For any details on errors that occur during the process of setting up the Tenda wifi password change, readers can provide feedback below and we will discuss together.
