Buzz
The E-74 error in Toshiba washing machines is a common issue in both direct-drive and regular models. This error can result from various causes not known to everyone. When your washing machine signals this error, you can quickly address it with the solutions outlined in the following article.
1. Identifying the E74 Error on Toshiba Washing Machines
The E74 error code is quite common in Toshiba washing machines, often caused by a faulty counter, overloading due to too many clothes, or obstructions preventing the drum from rotating. Additionally, it may result from an obstructed drum or a malfunctioning control board. If your washing machine displays this issue, you can choose to troubleshoot it yourself or call a technician for a professional inspection.
2. Cases in Which Toshiba Washing Machines Display the E74 Error Code
If your Toshiba washing machine encounters the E7-4 error, the display will show E7 followed by a blinking -4 when you power it on. Additionally, you won't be able to use the functions on the control panel, and only the POWER ON/OFF button will be functional.
3. Possible Causes and Solutions for Toshiba Washing Machine E74 Error
Due to a malfunctioning motor
Reason:
Pressing to start the washing machine, but it takes only from five to ten seconds before the screen displays the E74 issue.
Troubleshooting:
You can replace the capacitor if the engine is inactive or performing poorly.
If the machine's engine is still operating normally but the screen displays the E74 error, contact a reputable washing machine repair center to replace the corresponding component for the best possible performance. Washing machine.
Due to the fact that the mainboard is damaged
Reason:
The memory IC on the internal motherboard has been operating at its maximum.
Troubleshooting:
After pressing the combination of WASH, SPIN, PROGRAM SELECTION, and POWER ON buttons until the washing machine beeps, press the START button. Then, turn off the power and turn the machine back on!
Due to a faulty wire on the washing machine
Reason:
Because the wire used to connect the board to the engine is damaged
Troubleshooting:
The wire should be replaced with a new one.
Due to a malfunction in the word counter
Reason:
The machine's engine operates normally, but the E74 error is displayed on the screen. Additionally, the machine makes noise but does not rotate; indicating a possible malfunction in the washing machine's word counter.
Troubleshooting:
Remove the motor and install a new word counter for the washing machine. Be cautious to purchase the authentic version corresponding to the machine type to ensure the word counter and the washing machine will operate synchronously.
Storage overload
Reason:
The washing machine has been in use for an extended period; and although it continues to operate smoothly, the screen still displays the E74 error. It's possible that your washing machine has exceeded its storage capacity.
Troubleshooting:
You need to reset the washing machine to clear the programmed settings.
To turn off the appliance, press and hold the power control button. The next step is to disconnect the power, wait for about three minutes, then reconnect before turning on the device.
Hope this article provides you with effective solutions when encountering the E7-4 error on Toshiba washing machines. This will make your troubleshooting process faster and easier if your washing machine faces this issue.
