Buzz
There are several reasons leading to the condition of plugging phone earphones into the computer and hearing nothing. Understanding which case your computer falls into will help you troubleshoot quickly and accurately.
What can be done when encountering the issue of plugging phone earphones into the computer and hearing nothing?
No need to wait any longer, Mytour will consolidate the reasons for plugging phone earphones into the computer and not hearing anything, providing specific troubleshooting methods in the following content.
Compilation of errors when plugging phone earphones into the computer with no sound
1. Software conflict error
If you were hearing normally before but suddenly at some point plugging phone earphones into the computer results in no sound, the cause may be software-related. This often happens when users install or uninstall a program, causing the computer to operate unstably and conflict with each other.
At this point, the easiest way to fix it is to restart your computer quickly to bring it back to a normal state. Then, try plugging in your headphones to check.
2. Windows Volume Setup Error
If the cause is not software conflict, it could be due to incorrect Volume settings, resulting in no sound when plugging phone earphones into the computer.
Step 1: To check, right-click on the speaker icon on the Taskbar in the bottom right corner of the screen, select Open Volume Mixer .
Step 2: In the newly opened dialog, check for any options in Mute mode, and press to re-enable.
Furthermore, users can click on the Troubleshoot sound problems section to allow the system to self-diagnose and resolve issues.
Step 3: Audio driver error
The next scenario causing users to experience issues when plugging in headphones to the computer is related to audio driver errors. Quickly resolve this by uninstalling and reinstalling the audio driver.
Step 1: To uninstall the existing Audio Driver from your computer, click on the Start button in the bottom left corner of the screen and type Device Manager to search.
Left-click on the Device Manager program in the search results.
Step 2: In the opened Device Manager window, left-click on Sound, video and game controllers . Then, right-click on VIA HD Audio and choose Uninstall device.
A confirmation dialog opens; click Uninstall once again to confirm.
After removing the old sound driver from your device, restart it, and the system will automatically detect and update the new sound driver. If Windows cannot find a suitable sound driver, visit the website of the manufacturer of your sound card and manually install it.
4. Hardware Issue
The issue of plugging in headphones and not hearing anything can stem from very simple causes. It could be that you plugged in the wrong way or there's a problem with the device's audio jack. Try unplugging the headphones, clean the jack, and plug them back in to check.
Or even simpler, you might not have turned on the power button on the speaker, or someone may have turned the physical volume button on the speaker to the minimum. To make sure, you need to thoroughly check all possible scenarios to troubleshoot accurately.
Thus, Mytour has joined you in analyzing common issues leading to the problem of plugging headphones into the computer but not hearing anything. If you've tried all the scenarios and still can't resolve it, consider taking your headphones and computer to a shop for the most accurate inspection and repair. Additionally, if the headphones are fuzzy or unclear, you can refer to ways to fix fuzzy, noisy, or unclear headphones here for possible solutions.
