Buzz
The E10 error on Electrolux washing machines is typically diagnosed to be related to water supply issues. It occurs when the water supplied is inadequate for a wash program, rendering the machine inoperable.
So, what causes the E10 error on Electrolux washing machines? Is it due to usage habits or manufacturing defects? And how can you fix the E10 error on your Electrolux washing machine? All these questions will be addressed in this article. Join us as we explore the solutions below.
Operating Principle of Electrolux Washing Machines
- Command 1: When you press the Start button to initiate the machine, the control circuits will command to lock the door.
- Command 2: After locking the door, rendering it non-openable, the drain pump will be activated to pump out any remaining water in the drum.
- Command 3: The machine will then supply water and agitate to operate the laundry. The machine will perform 3 - 4 cycles of water supply, agitation, and spinning, concluding with the final spin cycle. Afterward, it releases the door switch, ending the washing command. The E10 error on Electrolux washing machines occurs during the 3rd cycle and is related to the water supply line into the machine.
Factors Leading to Electrolux Washing Machine E10 Error
- Weak water supply causing extended waiting time.
- Clogged water supply hoses or valves, leading to delayed water supply to the machine.
- Clogged detergent drawer due to excessive detergent residue.
- Faulty water supply valve in the washing machine, resulting in frequent mechanical failure and coil damage.
- Malfunction in the water supply control IC, displaying the E10 error code on the screen.
How to Quickly Identify E10 Error in Electrolux Washing Machine?
For modern Electrolux washing machines equipped with an LCD display, identifying the E10 error is straightforward. However, for models without an LCD screen, recognition is based on the number of flashes and the color of the Start/Pause light. Technicians commonly perform this task. In the case of Electrolux washing machines with power loss issues, this method is not applicable.
How to Permanently Resolve Electrolux Washing Machine E10 Error?
- If the water supply to the machine is too weak, enhance water pressure by installing a booster pump to improve water pressure.
- Remove and clean the sediment filter on both ends of the water supply hoses. Clean by spraying and using a brush to remove dirt and sediment.
- If the water supply is damaged, immediately contact the Electrolux service center for timely replacement.
- Clean the detergent/bleach compartment if there are signs of weak water inflow.
- Contact the service center or specialized Electrolux washing machine technician to replace the water control IC in case of IC-related errors.
- Call a technician for regular maintenance, repair, and servicing of Electrolux washing machines.
Your usage habits from the first wash will determine the lifespan and performance of the machine. Therefore, we recommend using Electrolux washing machines correctly and following the proper techniques to avoid incidents that may damage the machine and ensure long-term durability.
These are the reasons leading to the Electrolux washing machine E10 error. We hope this article is helpful for you in using the washing machine.
