Buzz
During the usage of washing machines, most people encounter at least two unusual signs like excessive shaking, loud noises, detergent residue remaining on clothes...
1. When should you consider using a pressure booster pump for your washing machine?
During the usage of washing machines, most people encounter at least two unusual signs like excessive shaking, loud noises, detergent residue remaining on clothes, slow drainage of washing machine water, clothes not being properly dried after spinning, and especially weak water flow into the washing machine. So, it's time to find out when to use a pressure booster pump for your washing machine!
What is a pressure booster pump? When should you use a pressure booster pump for your washing machine?
A water booster pump is a device used to increase the water pressure as it flows through pipes, making the water flow from the faucet stronger than the normal flow rate.
Regardless of the type of washing machine you use, you'll almost certainly encounter a situation where the water supply to the washing machine is abnormally weak. Therefore, the use of a pressure booster pump for washing machines is common when.
*Here are some situations when you should consider using a pressure booster pump:
Washing machine positioned at the same level as the water tank
Many households often place the washing machine and water tank on the same rooftop level or at a position where the washing machine and water tank are at the same height, causing low water pressure and insufficient water supply to the machine.
.
Therefore, you need to pay attention to the positioning of the washing machine relative to the water tank in the house. If the water tank is placed on the rooftop, the washing machine should be placed at a lower position, or a pressure booster pump should be used.
Washing machine positioned in an area with unstable water supply
Before installing a washing machine, you need to check the water pressure in the house. In many places, the water supply is unstable, sometimes weak - sometimes strong, making it difficult to choose the installation position of the washing machine.
Use a pressure booster pump for weak water supply to the washing machine.
Causes of weak water supply to the washing machine
Weak water supply to the washing machine can have many causes, besides the positioning of the washing machine relative to the water tank, it could be due to the following factors:
Accumulation of dirt in the filter
Weak water supply to the washing machine could be due to the accumulation of dirt or obstacles in the filter, causing the water flow into the washing machine to be weak.
>> Solution: Regularly clean the washing machine, especially the water supply and drainage pipes to remove dirt residue so that water can be supplied more strongly, or drainage can be faster.
Water tank runs out of water
Many households still use water tanks alongside direct water sources for washing machines. Therefore, the water supply to washing machines may be affected when the water tank runs out of water.
>> Solution: Check the water tank to see if it is empty. If so, pump water into the tank to supply water to the washing machine again. Washing machine water supply valve gets stuck
When the washing machine starts its washing cycle, the circuit board sends a signal for the water supply valve to open and allow water to flow into the machine drum. If the water supply valve gets stuck, the water supply to the machine will be affected.
>> Solution: Check the valve again, and it is often caused by dirt in the water supply, leading to the water supply valve getting stuck.Board mạch của máy giặt bị lỗi
The main function of the circuit board is to control all operations of the washing machine, so if the water supply to the washing machine is weak or not supplied, it may be due to a faulty circuit board.
>> Solution:
Have an appliance repair technician check the circuit board for any abnormal issues.
3 Requirements of washing machine pressure booster pumps
Pressure booster pump products need to meet the following requirements:
The pump pressure should not be too high as it may damage the washing machine.
Minimal pump noise, generally operating quietly to avoid affecting family life.
For some modern smart washing machines, if the water supply to the washing machine is too weak, causing the water supply time to be extended, the washing machine will display an error message.
.
