Why Does iPad Bend Without Impact? Effective Remedies

In this article, Mytour will share detailed insights into the causes and solutions below.

Why Does iPad Bend Without Impact?

Technically, iPad is designed with premium-grade solid aluminum, intended to shield it from external impacts like drops or collisions. However, this robustness complicates the repair process when iPad bends.

iPad Battery Swelling

The primary reason behind iPad bending is due to the swelling of the device's battery. The iPad's battery is integrated into the frame, positioned directly behind it. When damaged or swollen, the battery exerts pressure on fixed points of the frame, leading to bending or even screen detachment.

The battery swelling process occurs gradually, causing the frame to bend over time. Without careful attention, users may not notice their iPad gradually bending. Therefore, upon detecting this issue, users should promptly seek advice and repair from reputable stores or service centers.

Manufacturing Defects

In the past, there has been confirmed information from Apple regarding iPads bending during production. However, users need not worry as this is a normal occurrence and does not affect the user experience. Additionally, there have been cases of iPads bending shortly after purchase.

However, the extent of bending varies greatly among each 2018 iPad Pro. Some experience severe bending, even causing the screen to detach from the frame. According to Apple's responses on the MacRumors forum, heavily bent iPad Pros will be replaced if determined to be a manufacturer's defect.

Using Incompatible Cases or Covers

Apple's design for this iPad features a large, stunning, and modern display with minimal bezels. However, to achieve this, Apple had to compromise the device's sturdiness and durability. Consequently, earlier iPad Pros were prone to bending upon strong impacts.

Furthermore, using ill-fitting cases or covers can also cause the iPad to bend due to excessive compression pressure. In such cases, the iPad's frame is susceptible to bending over time.

Dealing with a Bent iPad

Firstly, check if your iPad is significantly bent. To do this, lay the iPad's back flat on a table or any flat surface. If the bend creates an angle of less than 1mm with that surface, there's no need to worry too much about the issue.

However, if the bend is noticeable and substantial, immediate action is advisable. Below are some ways to address a bent iPad:

Official Warranty Coverage

Replace relevant components and frame

If your iPad is bent and loses some functions like unresponsive touch, no display, etc., you'll have to deal with more issues. You need to replace the frame and some affected internal components such as the motherboard, screen, or battery.

Repairing bent frame

If the iPad is bent but functionalities remain normal, indicating no impact on the motherboard, screen, and battery, you can salvage the situation by repairing the device and bending back the frame.

However, it's advisable to take the bent iPad to a store for expert repair. In reality, repairs only offer temporary solutions, and your iPad remains at risk of bending again as before.

Tips to prevent iPad bending

While using, everyone should note a few things to avoid the situation of iPad bending.

Use high-quality cases and covers

To protect the iPad, users should choose high-quality cases or covers, suitable for the device model and size. This not only enhances impact resistance but also helps prevent bending caused by the influence of cases or covers.

In fact, using a case correctly can minimize the risk of iPad bending. However, if the iPad is directly impacted or squeezed by significant pressure, it still cannot be corrected. Due to the wide format of the iPad, users need to be cautious when using it to protect the iPad best.

Regularly check the battery

Regularly checking the battery status is a way to protect the iPad from bending caused by swollen batteries. To check, you only need to go to Settings, then select Battery, and check Battery Health. If the Maximum Capacity is displayed below 80%, it is a sign that the battery needs to be replaced according to Apple's recommendation.

Utilize ample space to store your iPad

To prevent the bending issue of your iPad during usage or transportation, it's advisable to prepare ample storage space. Large backpacks, handbags, or school bags with spacious dimensions are highly suitable for protecting the iPad from being squeezed. Additionally, opt for bags made of soft fabric or with protective padding to minimize impacts and direct pressure on the iPad.

Inspect upon purchase

To ensure safety during usage, users should inspect the curvature of the iPad, whether purchasing a new or used device. This inspection helps to avoid inconvenience and discomfort caused by a bent iPad.

Conclusion