Buzz
During the operation of the air conditioner, wastewater flows out through the pipes in the condenser. However, if you notice that the air conditioner is not draining wastewater, this could be a sign of a malfunction. Let's explore the causes and solutions when the air conditioner fails to drain wastewater in the following article!
1. Non-functional condenser - The reason the air conditioner doesn't drain wastewater
A non-functional condenser is one of the basic and most common reasons why the air conditioner does not drain wastewater. The electronic circuit board is damaged, causing the evaporator to not cool. At the same time, it also causes the condenser to be non-functional, and wastewater does not flow out.
To remedy this situation, you need to check the installation position of the condenser to see if it is suitable or not. Especially whether the screws have been securely fastened. If not, you need to fasten them again and choose a suitable installation position.
In addition, when the electronic circuit board is damaged, you need to repair it to continue using the air conditioner. Repairing the circuit board is quite complex, so you should contact professional repairmen for assistance.
>>> Explore more: Clogged Air Conditioner Condenser - Causes and Fixes
2. Air conditioner out of gas or low on refrigerant
Using the air conditioner for too long without refilling it with new refrigerant will leave the device without enough fuel to operate. As a result, the fan speed decreases, and water turns into frost, preventing water from draining out.
To address this issue, you should use a gas gauge to check the current gas level in the air conditioner. When you notice low or no gas, you should refill it to ensure smooth operation.
The process of refilling gas requires precise techniques, so to ensure safety, you should contact a repair center for assistance. Additionally, the newly added gas must be the same type as the one previously used to avoid any incidents when using the air conditioner.
3. Non-functional drainage pump causing the air conditioner not to drain wastewater
The air conditioner block is a crucial component during machine operation. When this part malfunctions, it can be due to a faulty control panel, a loose circuit, a non-rotating motor, causing the air conditioner not to drain wastewater
An effective way to handle this is to check the block, especially the block capacitor, to see if it needs replacement. If the compressor still doesn't work after replacement, a new block is required.
>>> Read more: What is an Air Conditioner Block? Common Types of Air Conditioner Blocks
Examining and troubleshooting issues related to the block are quite complex, requiring specialized knowledge. Therefore, Mytour recommends contacting a repair center for assistance
4. Damaged circuit board
Similar to the air conditioner block, the circuit board is also a critical component affecting the operation. Prolonged and continuous usage at a high frequency can lead to electronic circuit damage or burning, affecting the circuit board. Hence, the air conditioner may encounter various issues, including the failure to drain water
In this case, the most effective solution is to contact specialized technicians for troubleshooting. Absolutely do not attempt to disassemble components for inspection on your own to avoid causing more serious damage.
5. Air conditioner not draining wastewater due to a leaking gas line
Apart from the air conditioner running out of gas, a situation where the gas line is leaking is often caused by incorrect installation or prolonged use leading to wear and tear. Insects biting or gnawing can also contribute to gas line leaks, a common cause of the air conditioner not draining wastewater.
Solution: Users should inspect the gas line to identify any leaks and determine the size of the openings. If small openings are found, temporary solutions include patching them up. However, if the gas line is too old and significantly worn, it is advisable to replace it to ensure safety during usage.
>>> Read now: How Long Does an Air Conditioner Last Before Running Out of Gas?
6. Incorrect air conditioner installation
Incorrect air conditioner installation or tilting the drain tray can cause the wastewater to flow directly onto the evaporator or through the pipes. This not only damages the equipment but also compromises the cleanliness of the living space.
To remedy this situation, follow these steps:
- When the air conditioner shows signs of water leakage, immediately contact a repair technician for resolution.
- Check the drainage pipe to ensure the appropriate tilt. Adjust the evaporator and drain tray if they are tilted.
- Additionally, ensure proper air conditioner installation techniques to prevent any potential issues.
Here, Mytour has shared 6 reasons and solutions for when the air conditioner doesn't drain wastewater. We hope these useful tips will help you effectively address this issue. Thank you for following our article!
