If your Blink camera blinks green, it typically indicates a Wi-Fi connection issue, meaning your Mini or Mini 2 camera is trying to reconnect to the previous network. Keep reading for additional reasons and fixes for when you see a green light flashing on your Blink camera.
How to Fix the Green Blinking Light on Your Blink Camera
A green blinking light on your Blink camera points to a network issue, signaling that it's trying to reconnect to its prior network. Confirm that the camera is on the correct network (2.4 GHz) and check that the signal strength is adequate. You might need to move the router closer to ensure a stronger, unobstructed connection.
Steps to Follow
Reasons Your Blink Camera Displays a Green Blinking Light


- If your connection is slow, refer to this Mytour guide for ways to boost your speed, such as rebooting your router, which is a common and effective troubleshooting step to restore functionality to your Blink camera.


Understanding the Light Indicators

Understand the Lights on Mini and Mini 2 Cameras | |
---|---|
Blinking red | Mini/Mini 2 Camera is starting up. |
Blinking blue, solid green | Mini/Mini 2 Camera is in pairing mode and ready to be set up. |
Blinking green | Mini/Mini 2 Camera is offline and attempting to reconnect to previous network |
Solid red | Mini/Mini 2 Camera is unable to connect to the internet. |
Solid blue | Mini/Mini 2 Camera is recording motion or someone is accessing live view. You can disable this in Device Settings > General Settings > Status LED > Always off. |
No lights | Mini/Mini 2 is working normally. Can also show that the camera doesn't have power. |
Additional Troubleshooting Tips

- Also, take into account lighting conditions. Extreme brightness or total darkness can alter how your camera operates.


- If you have a Sync Module, unplug it from the power source for 10 seconds, then reconnect it.

- If pressing the button while the camera is on doesn't work, follow these steps:
- Unplug the camera.
- While holding the Reset button, plug the camera back in and turn it on.
- Once the camera turns on, release and press the Reset button again.
- This will reset all settings to their factory defaults, and you'll need to reconfigure the camera.

- It's possible that you received a defective unit. If it's still under warranty, you might be eligible for a replacement camera!