How to Set the Time on a Baby G Watch

This article serves as a guide on how to set the time on your Baby G wristwatch. The time-setting procedure for both digital and semi-digital Baby G watches is the same, though the additional features of each watch model may vary depending on the version you own.

Get familiar with the buttons on your watch. You will typically find four main buttons on the Baby G watch. The names of these buttons might differ from the description below, but they all serve the same functions once the watch is in setting mode:

• Adjust – Located at the top left corner. Used to switch the watch to setting mode.
• Reverse – Located at the top right corner. Used to move backward through values (like time zones or hours).
• Forward – Located at the bottom right corner. Used to move forward through values (such as time zones or hours).
• Mode – Located at the bottom left corner. Used to cycle through different watch modes.

Press and hold the Adjust button for 3 seconds. This is the button at the top left of the watch face. After holding it for 3 seconds, you will see one of the options on the watch display start blinking.

Press the Mode button repeatedly until the Seconds value starts blinking. The "Mode" button is located at the bottom left corner of the watch. Once the seconds begin to blink, you can proceed with the next steps.

Set the seconds to match the current time. Use the Reverse or Forward buttons at the top or bottom right corners of the watch to adjust the seconds until they reflect the current time (e.g., 30 seconds).

Select the Minutes value. Press the Mode button once more to choose the minute setting.

Adjust the Minutes to be one minute behind the current time. You can do this by pressing the Reverse or Forward buttons.

• Setting the minutes to one minute earlier ensures the minutes will automatically sync when the seconds reach 60.

Select the Hour value. Press the Mode button again until the current hour value is displayed for adjustment.

Set the Hour value to the current time. Press the Reverse or Forward button to adjust the hour to the correct time (e.g., 6).

• If you're using the 12-hour time format, ensure the AM/PM setting is correct. Otherwise, you may need to press the button 12 times to get the right time.

Adjust the blinking options. You can press the Mode button to cycle through other options on the watch and use the Reverse/Forward buttons to adjust as needed:

• Time zone - This is usually displayed at the top of the watch. The time zone will impact the current time.
• DST - If supported by your watch, you can enable or disable Daylight Saving Time (DST) for automatic time adjustments during summer.
• 12H or 24H - You can choose between the 12-hour format (e.g., AM and PM) or the 24-hour format (e.g., 06:00 for 6 AM, 18:00 for 6 PM).
• Light - The Baby G watch has a light function. You can set how many seconds the light stays on.
• Date - You can usually adjust the month and day on supported watches.

Press the Adjust button. This will set the time on your Baby G watch according to your selections.

• On some models, especially semi-digital versions, you may need to hold the Adjust button for about two seconds before the time is finalized.
• The hands on semi-digital models will automatically adjust to match the digital time setting.

• The hands on some Baby G automatic watches may stop moving when synchronized with digital time. In such cases, it is advisable to take the watch to a service center or the warranty department.