Buzz
Explore Pulse Mode, popular flavors, and more
To get started with your Geek Bar Pulse after unpacking, remove the mouthpiece's silicone plug, shift the bottom tab to either the middle or upper setting, and take your first puff. The Geek Bar Pulse has quickly become a top choice for disposable vapes, thanks to its LED display and dual-coil design. Learning how to properly use and care for it can be tricky, so we've created this guide to help you understand everything about the Geek Bar Pulse, from different modes and settings to activating Pulse Mode and more.
How to Operate Your Geek Bar Pulse
- Unbox your Geek Bar Pulse and take off the silicone plug from the mouthpiece.
- Slide the tab at the bottom to the middle or upper position to power it on.
- Take a puff to begin your vaping experience. If you're a beginner, start with a light draw.
Steps to Follow
How to Operate Your Geek Bar Pulse
Unbox your Geek Bar Pulse and remove the mouthpiece plug. Tear open the top of the box and pull out the pouch containing your Geek Bar Pulse. Open the pouch, and then remove the silicone plug from the mouthpiece.
- Be careful when opening the pouch to avoid dropping your new Geek Bar Pulse!
- Your Geek Bar Pulse package should include a USB-C charger, the device itself, and a card that lists other available flavors. Some boxes may also include a user manual.
- The flavor card details the coolness and sweetness levels for each flavor.
Adjust the bottom tab to the middle or upper position to activate and modify settings. The device is off when the tab is in the lowest position. The middle position activates standard mode, while the upper position switches to Pulse Mode.
- To change the settings on your Geek Bar Pulse, slide the bottom tab to either the middle or upper positions. A “Pulse” label above the upper setting helps guide you in making the change.
- Pulse Mode delivers stronger puffs compared to standard mode, but it also provides fewer puffs overall, so be mindful when selecting your preferred setting.
Gently puff on your device to ensure it’s working properly. Take a light puff to release flavor and vapor, confirming that your device is functioning. If you're an experienced vaper, you can start using it as usual. If you're new to vaping, take a soft puff to avoid any e-liquid splashing out.
Charge your Geek Bar Pulse with the included USB-C cable. When the battery is low, plug the USB-C cable into the port on the bottom of the device to start charging. The screen will light up, showing the current charge percentage. If you're a moderate vaper, you can expect about half a day's use in standard mode before recharging is needed.
- It takes approximately 55 minutes to fully charge the Geek Bar Pulse.
Geek Bar Pulse Settings
Standard mode operates with a single coil, providing 15,000 puffs. This is the traditional setting for disposable vapes. It uses two coils (heating elements) alternately, giving your puffs a gentle flavor and a smooth hit. Standard mode offers a consistent, mild experience that lasts longer than many other disposable vapes.
- With standard mode, you'll get more puffs compared to other disposable vapes, which usually give around 600 puffs.
- Activate this mode by shifting the bottom tab to the middle position.
Pulse Mode engages both coils for 7,500 more intense and flavorful puffs. This innovative configuration uses both coils for a stronger, more vibrant flavor. While the hits are more powerful, you get fewer puffs — 7,500 instead of 15,000. To activate Pulse Mode, move the bottom tab to the upper position.
- If you see a rocket ship icon on your screen, your device is in Pulse Mode.
What makes the Geek Bar Pulse stand out?
The Geek Bar Pulse introduced a dual-coil system and a smart display. The dual-coil design extends the device's lifespan by alternating coils with each puff in standard mode. It also solves the problem of checking your e-liquid and battery levels, something older disposables lacked. With the Geek Bar Pulse, the smart screen shows both battery and e-liquid levels.
- While other disposable vapes have adopted dual-coil technology, the Geek Bar Pulse was the first to introduce this groundbreaking feature.
- The 650mAh battery, 16mL liquid capacity, and USB-C charging port ensure the Geek Bar Pulse lasts longer than typical disposable vapes.
What does the screen display mean?
The screen shows your battery status, mode, and e-liquid level while you vape. To check the battery, look for the lightning bolt icon at the top of the screen. The five segments and the number next to it show your current battery level. If you see an empty open circle in the middle, that indicates standard mode. A rocket ship icon means you're in Pulse Mode.
- Your e-liquid level is displayed at the bottom of the screen with five segments, numbers, and a droplet icon to represent the remaining liquid.
How to Care for Your Geek Bar Pulse
Charge your Geek Bar Pulse regularly and store it in a cool, dry location. To keep your Geek Bar Pulse performing at its best, recharge it whenever the battery is low. When not in use, power it off and store it in a cool, dry place, away from high temperatures and direct sunlight, to protect the battery and preserve the quality of the e-liquid.
- Be cautious not to drop your Geek Bar Pulse, as this can cause internal damage or lead to an e-liquid leak.
Troubleshooting Your Geek Bar Pulse
If your Geek Bar Pulse is blinking red, the internal puff sensor may be obstructed. A red blinking light indicates that your device has entered safety mode. This often happens if the Geek Bar Pulse has been dropped on a hard surface. Try blowing firmly into the mouthpiece to reactivate the internal puff sensor and restore airflow. If this doesn’t resolve the issue, your device may need to be replaced.
If the LED screen is unresponsive, ensure your device is charged. If the device is fully charged and the screen is still not working, check if the device is still hitting. If it’s still functional, you can continue using it. However, if it’s not working, it’s time to replace the device.
If your Geek Bar Pulse isn’t charging, inspect the port for dust or debris. If the screen doesn't respond when you plug in the device, it may not be charging. Use a flashlight to examine the port for dust or debris. If you find any, blow air into the port to clear it out. For tougher particles, gently use a toothpick or another fine, non-metal tool to remove any obstruction.
- Be gentle when using the toothpick to avoid damaging internal components!
Frequently Asked Questions
What flavors are available for the Geek Bar Pulse? The Geek Bar Pulse offers 98 unique flavors. Some of the most popular choices include:
- Mexico Mango
- Sour Apple Ice
- Juicy Peach Ice
- Green Tea Ice
- Orange Creamsicle
- Coffee Tobacco
- Miami Mint
- Banana Taffy Freeze
- Banana Ice Cream
- Colombian Coffee Ice
- Pina Colada
What do the lights on my Geek Bar Pulse indicate? The lights on your Geek Bar Pulse serve several purposes:
- If your device is flashing red, it could mean a low battery, a connection problem, or that it has entered safety mode to prevent overheating or other potential damage.
- If the device flashes red while charging, this indicates a battery leak or an issue with the charger.
- A green cascading light means the device is in standard mode.
- A red cascading light signals that your Geek Bar Pulse is in Pulse Mode.
- A solid green light around the device shows that it is fully charged.
- A solid red light around the device means the battery is low and needs charging immediately.
How long will my Geek Bar Pulse last? The lifespan of your Geek Bar Pulse can range from weeks to months, depending on your vaping habits and the settings you use. Once the e-liquid runs out, you may get 4-5 more days of use before it starts to taste burnt.
- Using Pulse Mode will drain the e-liquid faster compared to standard mode.
How should I dispose of a Geek Bar Pulse? The safest method is to take it to a Household Hazardous Waste Collection Facility, which handles hazardous waste disposal, often at no cost. Alternatively, check with your local vape shop to see if they accept used devices for recycling. Stores like Home Depot and Best Buy may have battery bins where you can drop off old vapes or batteries as well.
Warnings
- In the United States, it is illegal for anyone under the age of 21 to vape.
- The sale of the Geek Bar Pulse is unauthorized in the United States.
