1. Washing machine not turning off after the wash cycle completes
Cause: The power switch of the machine may be stuck.Solution: Since this is a technical issue, contact your service center for repair assistance.

2. Excessively Long Water Drainage Time
Cause: The drain hose may be incorrectly connected, clogged, or deformed due to external factors.Solution: Turn off the washing machine and carefully inspect the drain hose. Check if the hose is torn or has any holes, and ensure it is connected correctly as per the instructions. Fix any issues found.

3. Water Not Flowing Into the Drum During Wash and Spin Cycles
Cause: There might be an issue with the water supply or you may have missed a step before starting the wash cycle.Solution: Check the water source, ensure the water inlet valve is open, and inspect the metal filter inside the water hose for any blockages, dirt, or buildup from minerals that could clog the drainage system.

4. Detergent Residue Left on Clothes After Washing
Cause: You may have used too much detergent, leaving residue on the clothes, or the water temperature might have been too low, or there was insufficient water in the washing machine.Solution: Use the correct amount of detergent, and ensure the water temperature is below 40°C to fully dissolve the detergent.

5. Water Still Entering the Machine During Spin or Wash Cycles
Cause: This may occur if you open the lid and add more clothes, or if the water level provided to the machine is insufficient. It could also be caused by the laundry being unbalanced, or a malfunction in the water inlet valve or the machine's board.Solution: Simply pay attention to the washing process to ensure the machine runs normally.

6. Washing Machine in Spin Mode but Not Spinning
Cause: This could be because the user forgot to close the lid, or the clothes are off-center in the drum.Solution: Make sure to check if the lid is properly closed. If the clothes are bunched to one side, simply balance them out. Also, check if the drainage hose is clogged. If the issue persists, contact a service center for repairs.

7. Washing Machine Not Working at All
Cause: This could be due to an internal technical issue with the washing machine or a problem with the power supply. The power cable might not be properly connected to the outlet, the POWER SWITCH may not be pressed, or the START/PAUSE button might not have been activated.Solution: Prioritize checking the essential components: ensure the POWER switch and START/PAUSE button are properly pressed, confirm the power cord and supply are working fine. For internal technical issues, contact a service center for repair.

8. Washing Machine Shaking Strongly
Cause: Typically, the washing machine shakes heavily due to improper leveling of the machine, with the feet unevenly positioned. It can also be caused by technical issues like misaligned load-bearing components, a malfunctioning motor that controls the drum's rotation, or a loose drive belt.Solution: Simply adjust the washing machine's position to ensure it's stable and properly leveled to avoid any imbalance and ensure safety.

9. Washing Machine Making Loud Noises
Cause: This issue may occur when clothes inside the drum become tangled, causing a disruption in the washing cycle, or it could be caused by foreign objects left in the pockets that haven't been removed. Technical issues like a bent drum shaft or shock absorber malfunction could also be the culprits.Solution: Turn off the machine, check the clothes, and make sure they are untangled. For technical problems, the best solution is to contact a service center for repairs.

10. Water Not Draining from Washing Machine
Cause: This issue occurs when the user does not follow the proper usage instructions, setting water levels and pressure lower than required.Solution: Adjust the water level and pressure to meet the required standard of 15 liters per minute. If the problem persists, check the drain hose for proper placement, ensuring it is not kinked or too high (more than 15 cm above the ground). Make sure the washing machine lid is securely closed and the hose is clear of blockages.

