Creating Windows To Go USB with AOMEI Partition Assistant, storing Win operating system

Buzz

Creating Windows to Go USB with AOMEI Partition Assistant will enhance your flexibility in using your personal data across multiple mobile devices anytime, anywhere. Put simply, Windows to Go is an operating system installed on a USB, bootable from USB instead of an internal HDD as we typically use.

Windows to Go is not an unfamiliar operating system but rather Windows 8/10 used through certain tools to optimize and install onto USB like AOMEI Partition Assistant, Rufus,... Creating a Windows to Go USB will be very convenient and suitable for individuals who are constantly on the move for work or rescue missions in case regular Windows suddenly fails to boot. Especially, AOMEI Partition Assistant allows you to create Windows to Go USB from any Windows 8/10 version very easily.

GUIDE TO CREATE WINDOWS TO GO USB WITH AOMEI PARTITION ASSISTANT

PREPARATION:

- 01 USB or portable hard drive with a minimum capacity of 32GB for installing Windows to Go

- Windows 10 operating system installer: Download Windows 10 or Windows 8 operating system installer: Download Windows 8

- Download and install the latest version of AOMEI Partition Assistant tool here: Download AOMEI Partition Assistant

EXECUTION:

Step 1:Connect the prepared USB/portable hard drive to your computer. Then launch the AOMEI Partition Assistant tool, and in the main interface, select Windows To Go Creator to begin setting up the creation of Windows to Go USB using AOMEI Partition Assistant.

Step 2: In the Windows To Go Creator window, select the correct USB/portable hard drive with a capacity of over 32GB that you connected earlier under Select a USB Drive. Then click Browse to locate the Windows 8/10 installer.

Step 3: Select the Windows installation version with the correct architecture that you want to create Windows to Go USB, then click Open.

Step 4: Once you have selected the Windows installation, you will be taken back to the Windows To Go Creator window. Here, you confirm the information such as the USB drive, the selected Windows installation for creating Windows To Go USB is correct to avoid regrettable mistakes, then click Proceed after verifying the accurate information.

Step 5: The tool will display a warning that all data on your USB/portable hard drive will be erased when creating Windows To Go USB. Therefore, you should back up important data before clicking YES to start the decompression and installation process of Windows To Go on USB.

Step 6: The process of creating Windows To Go USB will take some time depending on the computer's speed and the size of the Windows installer. After the process is completed, the tool will display a notification The operation completed successfully.

You have completed creating Windows To Go USB with the operating system and booting Windows To Go on any device you plug the USB into. You can use WinToUSB to install Windows 8 or earlier versions when you only have a USB with a capacity lower than 16GB.

Creating a Windows To Go USB is quite an effective 'firefighting' method when you need to use your computer but encounter Windows errors. If you need to quickly and conveniently fix Windows errors using a USB, you should create a boot with Hiren's Boot with many powerful features to help you repair, restore data,…

Nội dung từ Mytour nhằm chăm sóc khách hàng và khuyến khích du lịch, chúng tôi không chịu trách nhiệm và không áp dụng cho mục đích khác.

Nếu bài viết sai sót hoặc không phù hợp, vui lòng liên hệ qua email: [email protected]