Fixing the incessant rebooting and logo absence glitch on Galaxy A32 5G

There are multiple reasons behind the incessant rebooting and logo absence glitch on Galaxy A32 5G. In this article, Mytour will guide you on how to troubleshoot and fix this annoying glitch.

I. Root Causes of Galaxy A32 5G's Continuous Rebooting and Logo Absence

The primary reasons behind Samsung Galaxy A32 5G's continuous rebooting and logo absence may include:

- Firmware Flashing Error: Each firmware is designed specifically for a particular smartphone model. It's worth noting that Samsung supports various versions of Galaxy A32 for different markets. If users install firmware intended for a different version, it can lead to errors causing the Galaxy A32 to continuously reboot and not display the device logo.
- ROM and Kernel Flashing Error: Similarly, downloading and flashing ROM, kernel, and other files designed for a different device can also cause the Samsung Galaxy A32 to become a 'brick.'

- Data Wipe and Cache Memory Error:

II. Fixing the Continuous Rebooting and Logo Absence Glitch on Galaxy A32 5G

Method 1: Force Shutdown Samsung Galaxy A32 5G

The simplest way to troubleshoot the glitch causing Galaxy A32 5G to continuously reboot is to force shutdown the device. To do this, press and hold the Volume Down button + Power button simultaneously until the device powers off completely, and the screen turns black. Wait for a few seconds, then press and hold the Power button until the device restarts and check if the glitch persists.

Method 2: Wipe Data and Perform Factory Reset

Suppose in case the above method is not feasible, and Galaxy A32 5G still continuously reboots and does not display the logo. The reason for the glitch may be due to software issues. In this scenario, the ideal solution is to wipe clean the data and perform a hard reset.

Normally, to reset Samsung Galaxy A32 5G, we can operate through the Settings menu. However, because the device is experiencing continuous rebooting and logo absence, we cannot access the Settings menu. Instead, we will perform a factory reset in Recovery Mode.

Follow the steps below:

Step 1:

Press and hold the Power button on Galaxy A32 5G. On the menu displayed, here you press Power off to turn off the device.
Step 2: After the device is completely powered off, press and hold both the Volume Up button + Power button simultaneously until the Samsung logo appears on the screen to access Recovery Mode.
Step 3: Use the Volume Up and Down buttons to navigate down to the option Wipe data/factory reset, then press the Power button to select the option.

Step 4: At this point, a prompt will appear on the screen asking if you want to erase all data on the device. Use the volume buttons to navigate to the option Yes and use the Power button to select the option.

Performing this action will wipe all data stored on your Samsung Galaxy A32 5G. After the process is complete, restart your device and check if it boots into the logo or if the continuous rebooting error persists.

Method 3: Perform Flash Stock Firmware

Finally, if none of the above methods are viable, the solution to fixing the continuous rebooting and logo absence glitch on Galaxy A32 5G is to perform a flash of the stock firmware.

If previously you encountered a flash ROM error or incompatible mod, restoring Galaxy A32 5G to its original manufacturer default state is also not available because the entire Android firmware is faulty.

Important Note

To perform Flash Stock Firmware, users' devices must activate Developer Options, USB Debugging, and OEM unlock. To activate these options:

- Access Settings =>About Phone =>Software Information. Here, find and tap on Build Number 7 times to activate Developer Options.

- Next, open the Settings app =>Developer Options => find and tap on USB Debugging. This action allows Galaxy A32 5G to connect to the computer for installing new firmware.
- Access Settings =>Developer Options and enable the OEM unlocking option.

Additionally, ensure:

- Your phone has at least 60% battery.
- Download USB driver for Samsung Galaxy A32 5G.

To download USB driver for Samsung Galaxy A32 5G, you can visit here.

- Download Samsung Galaxy A32 5G firmware.

Download Samsung Galaxy A32 5G firmware to your device here.

Proceed with the following steps to Flash Stock Firmware on Galaxy A32 5G:

Step 1: Download the Flash ODIN tool to your device and install it.

Download the Flash ODIN tool to your device and install it here.

Step 2: Proceed to extract and run the ODIN file.
Step 3: Press and hold both the Power button + Volume Down button on your Samsung Galaxy A32 5G phone to power off the device and enter Download Mode.
Step 4: Connect the device to your computer using a USB cable. If the USB driver is correctly installed, the ID:COM bar will display in blue.
Step 5: Click on the AP/PDA button and select the firmware file you previously downloaded and extracted.
Step 6: Access the Options menu and disable the Re-Partition option while activating the Auto Reboot and F. Reset Time options.
Step 7: Click on the Start button to begin the firmware installation process on your Galaxy A32 5G phone.

Once the process is complete, ODIN will display a PASS message along with details of the firmware installation time. During the process, your phone will restart several times.

Thus, this Mytour article has just guided you through some methods to fix the issue of Galaxy A32 5G continuously rebooting and not displaying the logo. Additionally, if you are unsure how to take a screenshot on Galaxy A32, you can refer to some articles already available on Mytour for further information.