Buzz
Induction cooktop not recognizing the pot is a common issue many users face while using the appliance. If you encounter this problem, the cooktop's display may show error codes or continuously beep without being able to cook food. In such cases, read the detailed information below.
1. Causes of Induction Cooktop Not Recognizing Pot
Using Incompatible Cookware Materials
Not all types of pots are suitable for induction cooktops. Induction cooktops work best with pots made of materials like cast iron, 304 stainless steel, steel, and stainless steel, known for their excellent heat conduction properties, ensuring thorough cooking.
However, materials such as aluminum, clay, and glass are unsuitable for induction cooking due to their low heat conductivity. Placing these types of pots on the induction cooktop will not generate sufficient heat.
Misalignment of Pot Placement
Most induction cooktops are designed with a circular cooking zone where pots are supposed to be placed. If the pot is not positioned within this circular zone or is significantly misaligned, the induction cooktop will not recognize it.
Uneven or Warped Pot Base
Even an uneven pot base can lead to the induction cooktop not recognizing the pot. When the pot base is rough or warped, its surface cannot fully contact the cooking zone, preventing the pot from heating up and cooking food properly.
Faulty IC or Sensors
If you've checked for all possible issues but the induction cooktop still doesn't recognize the pot, it's likely that the internal integrated circuit (IC) or sensors of the appliance are faulty.
Guide to Troubleshooting Induction Cooktop Not Recognizing Pot Error
Using Suitable Cookware Materials
If the issue is due to incompatible cookware materials, the solution is simple: invest in pots and pans made of induction-compatible materials.
You can use a magnet to determine which pots are suitable for induction cooktops. Simply bring the magnet close to the pot's base. If the magnet sticks to the base, you can confidently purchase and use that product on your induction cooktop.
Furthermore, you can also check if a pot is suitable for induction cooktops by examining symbols on the base. Symbols such as a magnetic field icon, coil symbol, or the word “Induction” indicate compatibility with induction cooktops.
Placing the Pot in the Correct Cooking Position
Adjust the pot to the correct position on the cooktop to quickly resolve the induction cooktop not recognizing pot error.
Opt for pots with flat bottoms to ensure efficient heat conduction. Replace warped or uneven pots promptly with ones over 10cm in size.
Replace the faulty IC or sensor of the induction cooktop to address the issue of it not recognizing the pot.
If you lack expertise in induction cooktops, seek assistance from technical professionals for repair and replacement support.
Replacing the IC or sensor of the induction cooktop can quickly resolve the issue of it not recognizing the pot. However, avoid self-replacing internal components to prevent further damage.
However, if you lack expertise in induction cooktops, contact technical professionals for repair and replacement support. Avoid self-replacing internal components to prevent further damage.
Here are the reasons and solutions for the induction cooktop not recognizing the pot that you need to know. Remember to save this for reference and application. Don't forget to follow Mytour to quickly update the most useful information.
Browse through the range of induction cooktops available at Mytour.
