Simple Guide to Maintain and Clean Water Purifiers at Home

Water purifiers are common household appliances, known and trusted by many. However, during usage, you should maintain and clean water purifiers to ensure water quality remains clean. Today, Mytour Supermarket will help you understand this issue in detail through the following article!

Maintaining and Cleaning Water Purifiers

Regular maintenance and cleaning of water purifiers is crucial to ensure that the machine operates efficiently and safely. Below are some reasons why you should do this:

Ensure water quality

Water purifiers are tasked with removing pollutants and impurities from the water source. However, over time, the filters may become clogged, reducing filtration efficiency. This can lead to post-filtered water being contaminated with bacteria and containing harmful toxins that affect health.

Ensure water quality

By maintaining and regularly cleaning, you ensure that all filters are cleaned and replaced on time to maintain the best water quality for your family.

Extend machine lifespan

Regular maintenance helps clean the internal components of the water purifier, removing dirt and hard substances that may accumulate during use. This helps the water purifier operate efficiently and prolong its lifespan.

Save costs

Regular maintenance and scheduled cleaning help prevent damages and unwanted malfunctions. If the water purifier is not maintained, it may result in decreased efficiency and require higher repair costs.

Save repair costs

To ensure the water purifier operates efficiently and maintains quality, regular observation and maintenance are crucial. Typically, water purifier maintenance should be performed at least once every 6 months. This helps maintain the function and stability of the purifier.

Regular maintenance and cleaning should be done at least once every 6 months

However, the maintenance interval may vary depending on the water quality and the frequency of water purifier usage. If the incoming water quality is low or if you use the water purifier more frequently, then performing maintenance earlier than 6 months may be necessary to ensure the efficiency of the purifier.

To safely and effectively maintain a water purifier, you can refer to the following guidance:

Step 1: Turn off the power supply of the water purifier to ensure safety.

Step 2: Lock the inlet water valve and ensure that water has drained out of the filter core by draining all the water from the faucet outside. This helps limit water spillage onto the floor during maintenance.

Step 3: Use a screwdriver or specialized tool to loosen and open the screws of the filter core in a counterclockwise direction.

Step 4: Clean the filter cup and filter core with clean water, using a soft cloth or soft-bristled brush.

Simple steps for water filter maintenance

Step 5: After cleaning, place the filter core back into the filter cup and twist the cup clockwise. Leave it loose for about 1-2 turns to release any trapped air.

Step 6: Once completed, plug in the power and open the water supply valve. Allow water to flow into the filter cores and then push out the air. Then, close the water supply valve and turn off the power.

Step 7: Tighten the filter cups to ensure that water cannot flow through the filter cores to the outside.

Step 8: Check other accessories such as the output water pipes to see if they need cleaning or replacement. Tighten the screws and lubricate necessary components with lubricating oil. Clean the machine with a soft cloth and water, or with mild cleaning agents.

Step 9: Finally, plug in the power, open the water supply valve, and check if the machine operates smoothly without any leaks. Then, you can use the water filter machine normally.

Clean the area around the filter component

To ensure effective operation, start by cleaning the area around the filter component. Use a soft cloth or soft-bristled brush to remove dust, dirt, and any excess liquid. Ensure thorough cleaning and limit contact with sensitive technical parts.

Clean the area around the filter component

Clean the water filter tank and filter core

Ensure proper maintenance of water filter containers and filter cores according to manufacturer's instructions. Use clean water and accessories such as soft cloths or soft-bristled brushes to remove dust and dirt residue. If necessary, you can use mild cleaning agents as directed and thoroughly rinse the parts before reassembly.

Clean water filter containers and filter cores

Clean reverse osmosis filters

Reverse osmosis filters are commonly used to remove sediments, bacteria, and chemical compounds from water. To clean reverse osmosis filters, you need to remove the filter from the system and rinse it thoroughly with clean water.

Ensure removal of impurities and dirt that may cause clogging and affect the filtering efficiency of the filter. After cleaning, reinstall the reverse osmosis filter according to the manufacturer's instructions.

Clean activated carbon filters

Activated carbon filters are a useful component in water filters for removing odor, taste, and dissolved compounds in water. To clean activated carbon filters, remove the filter from the machine and rinse it thoroughly with clean water.

Clean activated carbon filters

This helps to remove dirt residues that have been absorbed by activated carbon. After cleaning, reinstall the activated carbon filter according to the manufacturer's instructions.

Above is the article 'Guide on how to maintain and clean water purifiers easily at home' that you can refer to. Hopefully, this information will help you gain more useful knowledge, thereby effectively maintaining and cleaning water purifiers at home.